Order Products : sales@su-jiao.com
Formolene® HP4000
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E0PzeU_Formolene-HP4000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® HP4000 is a high performance copolymer that is designed for the most demanding requirements of nonpressure pipe applications. It has good long-term hoop strength performance, very high melt strength, and outstanding toughness even at low temperatures. Formolene® HP4000 meets all requirements of ASTM D4976 - PE 235 Formolene® HP4000 meets the requirements of ASTM F 2160 for use in solid wall HDPE conduit based pipe. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.944 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.16 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| 100% Igepal, Compression Molded, F50 | > 1000 | hr | ASTM D1693A |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr | ASTM D1693C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield, Compression Molded | 22.1 | MPa | |
| Break, Compression Molded | 34.5 | MPa | |
| Tensile Elongation 2(Break, Compression Molded) | > 500 | % | ASTM D638 |
| Flexural Modulus | |||
| Compression Molded | 758 | MPa | ASTM D3350 |
| Compression Molded | 965 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -90.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ARCEL® 730 (1.50 pcf) | NOVA Chemicals | PS+PE | ARCEL® |
| ExxonMobil™ HDPE HMA 014 | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
| Iupiace® GX1210 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| HIPEX® HX7IDZ (Series: HTR/OR) | KRAIBURG TPE | TPE | HIPEX® |
| ULTEM™ AUT195 resin | SABIC Innovative Plastics | PEI+PCE | ULTEM™ |
