Order Products : sales@su-jiao.com
POLYCOMPO PE 2022L
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E00GG0_POLYCOMPO-PE-2022L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 2022L is a Linear Low Density Polyethylene product. It can be processed by blown film or cast film and is available in Asia Pacific. Typical application: Film. Primary characteristic: good sealability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 2.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 55 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 430 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 102 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 120 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo PE F0554 | Sumitomo Chemical Asia | HDPE | Sumitomo PE |
| XYRON™ PV40Z | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| UNIGARD™ RE DFDA-1980 NT | The Dow Chemical Company | TP, Unspecified | UNIGARD™ |
| CP PRYME® Polyethylene PE100LLD-50M | Chase Plastics Services Inc. | LLDPE | CP PRYME® Polyethylene |
| HIVOREX 5000S | Lotte Chemical Corporation | HDPE | HIVOREX |
