Order Products : sales@su-jiao.com
COSMOTHENE® L420
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | TPC, The Polyolefin Company (Singapore) Pte Ltd |
| Trademark: | COSMOTHENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DzBEce_COSMOTHENE-L420.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
COSMOTHENE L420 shows good balance between neck-in and processability, good heat seal property, good adhesion (with base film). COSMOTHENE L420 is not formulated with additives. Extrusion coating on polyester film, biaxially oriented PP film, paper, aluminum and PE woven cloth. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 3.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Apparent Bending Modulus | 190 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 107 | °C | Internal method |
| Extrusion | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 240 | °C | |
| Cylinder Zone 2 Temp. | 270 | °C | |
| Cylinder Zone 3 Temp. | 300 | °C | |
| Cylinder Zone 4 Temp. | 330 | °C | |
| Die Temperature | 330 | °C | |
| Neck-in 1 | 15.0 | mm | Internal method |
| Extrusion instructions |
|---|
| Base film: BOPP; 20 µExtruder: 90 mm diameter laminator; L/D: 24; C.R: 3.5H Temperature: 330°C |
| Note Message | |
|---|---|
| 1 . | 150 m/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1200-65D | RTP Company | TPU-Polyester | RTP |
| SHIN-A SEZ-250 | SHIN-A T&C | Epoxy | SHIN-A |
| Stat-Rite® S-102 | Lubrizol Advanced Materials, Inc. | PE Alloy | Stat-Rite® |
| ALCOM® PC 740/171 GY1127-05LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Sylvin 9048-65 CLEAR | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
