Ebalta AH 100 / TG

Category: Epoxy , Epoxy; Epoxide
Manufacturer: Ebalta Kunststoff GmbH
Trademark: Ebalta
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: DyGnOw_Ebalta-AH-100-TG.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100.

This resin/hardener-mixture is inexpensive and therefore suitable as binder for silica sand auxiliary negatives.

Applications
  • Bonding resin for silica sand auxiliary negatives
  • Laminating resin for fabrics
  • Bonding resin for fillers

Properties
  • unfilled
  • low cost
  • low viscosity
General Information
Features
  • General Purpose
  • Low Viscosity
Uses
  • Binder
  • Bonding
  • General Purpose
  • Laminates
Appearance
  • Transparent - Slight Yellow
HardnessNominal ValueTest Method
Shore Hardness (Shore D)79 to 85ISO 7619
MechanicalNominal ValueUnitTest Method
Flexural Modulus 2600 to 3000MPaISO 178
Flexural Stress 95.0 to 105MPaISO 178
Compressive Stress 75.0 to 85.0MPaISO 604
ImpactNominal ValueUnitTest Method
Charpy Unnotched Impact Strength 20 to 40kJ/m²ISO 179
ThermosetNominal ValueUnit
Thermoset Components
    Hardener Mix Ratio by Weight: 20
    Resin Mix Ratio by Weight: 100
Uncured PropertiesNominal ValueUnit
Density (20°C)1.10 to 1.14g/cm³
Viscosity (25°C)0.64 to 0.66Pa·s
Curing Time (20°C)10 to 12hr
Pot Life 1(20°C)40 to 50min
Note Message
1 .200 g
Resin Grade Manufacturer Category Trademark
NORYL™ N1150 resin SABIC Innovative Plastics Asia Pacific PPE+PS NORYL™
AZR-Ecoplast 143 HDPE green 0.3 UrbanPlast SIA HDPE AZR-Ecoplast
DINALON® B1S25 C30-4152 Grupo Repol Nylon 6 DINALON®
EMERGE™ PC 8702-15 (AP) Trinseo PC EMERGE™
LUVOCOM® 1301-8940 Lehmann & Voss & Co. PPS LUVOCOM®