Order Products : sales@su-jiao.com
Edgetek™ PF-20GF/000
| Category: | PSU , Polysulfone |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DyGXfT_Edgetek-PF-20GF-000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 to 0.40 0.30 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.20 | % | |
| Saturation | 0.60 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 92 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 5520 | MPa | ASTM D638 |
| Tensile Strength 2(Break) | 103 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 5520 | MPa | ASTM D790 |
| Flexural Strength | 152 | MPa | ASTM D790 |
| Compressive Strength | 138 | MPa | ASTM D695 |
| Shear Strength | 62.7 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm, Injection Molded) | 69 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Annealed, 3.18 mm | 185 | °C | |
| 1.8 MPa, Annealed, 3.18 mm | 179 | °C | |
| CLTE - Flow | 2.9E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 135 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 338 to 371 | °C | |
| Mold Temperature | 93.3 to 149 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 5.1 mm/min |
| 2 . | Type I, 5.1 mm/min |
| 3 . | Type I, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAFORM® 9 B AR | A. Schulman Europe | Acetal (POM) Copolymer | SCHULAFORM® |
| Badaprene® TPV 55A 1041 | Bada AG | PP+EPDM | Badaprene® |
| DENKA POVAL K-05 | Denka Company Limited | PVOH | DENKA POVAL |
| Elastron® G G500.A60.N.ABS | Elastron USA, Inc. | SEBS | Elastron® G |
| ICORENE® 2910 | ICO Polymers EMEA, A Division of A. Schulman | Plastomer | ICORENE® |
