Order Products : sales@su-jiao.com
RX® 2-501N
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | RX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DtooyS_RX-2-501N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 2-501N is a mineral filled ISO diallyl phthalate compound which conforms with the requirements of ASTM D5948 Type MIG. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | ASTM D792 |
| Apparent Density | 0.75 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.30 to 0.60 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 55.0 | MPa | ASTM D638 |
| Flexural Modulus | 11700 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Compressive Strength | 145 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 24 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 274 | °C | ASTM D648 |
| CLTE - Flow | 2.5E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.23 | W/m/K | ASTM C518 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant 1 | ASTM D150 | ||
| 1 kHz | 4.30 | ||
| 1 MHz | 3.80 | ||
| Dissipation Factor 2 | ASTM D150 | ||
| 1 kHz | 0.015 | ||
| 1 MHz | 0.019 | ||
| Arc Resistance | 150 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRAMID® 4110G25 | Samyang Corporation | Nylon, Unspecified | TRAMID® |
| WELLAMID Nylon 6600 MRGV 20/20 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| Nycal™ 2150R33 | Technical Polymers, LLC | Nylon 66 | Nycal™ |
| ADPOLY EM-400 | Lotte Chemical Corporation | LLDPE | ADPOLY |
| GERMAMID 6 GF 50 | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
