Order Products : sales@su-jiao.com
ULTZEX™ 20100J
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | ULTZEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DpGBYP_ULTZEX-20100J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ULTZEX™ 20100J is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ULTZEX™ 20100J include caps/lids/closures and consumer goods. Primary characteristic: high escr (stress crack resistant). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.5 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | 300 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 54 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 9.00 | MPa | |
| Break, Injection Molded | 17.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | > 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ISO 306 |
| Melting Temperature | 120 | °C | ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® NY1599-N | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Edgetek™ CY4000 L BK025 | PolyOne Corporation | PC+PBT | Edgetek™ |
| Larton GK/400 | LATI S.p.A. | PPS | Larton |
| PLUSTEK PA301G7 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| SIBUR Synthetic Rubber SBR-1706 Grade C | SIBUR | SBR, Emulsion | SIBUR Synthetic Rubber |
