Order Products : sales@su-jiao.com
CONAP® AD-6408
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DoCs8Z_CONAP-AD-6408.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CONAP AD-6408 is a two-component polyurethane system formulated for filter sealant applications. CONAP AD-6408 exhibits superior penetration of filter media substrates and is based on components that are FDA an NSF approvable. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.01 | g/cm³ | |
| -- 2 | 1.13 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (100% Strain) | 17.0 | MPa | |
| Tensile Strength | 19.3 | MPa | |
| Tensile Elongation (Break) | 110 | % | |
| Tear Strength | 33.1 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 90 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 10000 | cP |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 6810M | Formosa Plastics Corporation | LDPE | TAISOX |
| APEX® 88-N054-A | Teknor Apex Company | PVC, Flexible | APEX® |
| Jiangsu Sinarise JO9531 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| Plaslube® J-1/30/TF/15 NAT | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| OTECH PVC OW633 - Wire Insulation | OTECH Corporation | PVC, Unspecified | OTECH PVC |
