Order Products : sales@su-jiao.com
ARMAMID® PA NE 20-3AP (M)
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Poly Plastic |
| Trademark: | ARMAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Dk1yeL_ARMAMID-PA-NE-20-3AP-M-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ARMAMID® PA NE 20-3AP (M) is a Polyamide 6 (Nylon 6) product. It is available in Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.50 | g/cm³ | |
| Molding Shrinkage | 0.30 to 0.50 | % | |
| Water Absorption | |||
| 23°C, 24 hr | 0.95 | % | |
| Saturation, 23°C | 6.6 | % | |
| Equilibrium, 23°C, 50% RH | 2.1 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 125 | MPa | |
| Flexural Modulus (23°C) | 6200 | MPa | |
| Flexural Stress | 160 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Unnotched Impact Strength | |||
| -40°C | 24 | kJ/m² | |
| 20°C | 32 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 190 | °C | |
| Melting Temperature | 219 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | 1.0E+13 | ohms | |
| -- 2 | 1.0E+15 | ohms | |
| Volume Resistivity | |||
| -- 3 | 1.0E+15 | ohms·cm | |
| -- 4 | 1.0E+17 | ohms·cm | |
| Electric Strength | |||
| -- 5 | 27 to 29 | kV/mm | |
| -- 6 | 22 to 24 | kV/mm |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Glow Wire Ignition Temperature | 960 | °C |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Burn Resistant Category (2.00 mm) | PX-0 | ||
| Trekingostoykost (KIT) | 175/225 in |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Dry |
| 3 . | Wet |
| 4 . | Dry |
| 5 . | Dry |
| 6 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4783 | RTP Company | PTT | RTP |
| Sindustris ABS LHI264 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| TEREZ PA 6 7500 GF30 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| ColorRx® PE2-1800RX | LTL Color Compounders, Inc. | PE Copolymer | ColorRx® |
| KRALASTIC® AN-495 | Nippon A&L Inc. | ABS | KRALASTIC® |
