FARBOSET® 1160

Category: Epoxy , Epoxy; Epoxide
Manufacturer: Cosmic Plastics, Inc.
Trademark: FARBOSET®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: DhOR3P_FARBOSET-1160.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Cosmic FARBOSET 1160 Black is a mineral filled epoxy molding compound featuring fast cure rates, long flow and excellent thermal shock resistance. It is designed for the encapsulation of coils, transformers, capacitors, diodes, relays, and other electrical and electronic components requiring good hot rigidity in molding.
General Information
Filler / Reinforcement
  • Mineral
Features
  • Fast Cure
  • Good Thermal Shock Resistance
  • High Rigidity
Uses
  • Electrical/Electronic Applications
Appearance
  • Black
Forms
  • Granules
Processing Method
  • Encapsulating
PhysicalNominal ValueUnit
Density 11.97g/cm³
Apparent Density 20.95g/cm³
Spiral Flow 89.0cm
Molding Shrinkage - Flow 0.60%
HardnessNominal ValueUnit
Durometer Hardness (Shore D)80
MechanicalNominal ValueUnit
Tensile Strength 75.8MPa
Flexural Strength 117MPa
Compressive Strength 228MPa
ImpactNominal ValueUnit
Notched Izod Impact 19J/m
ThermalNominal ValueUnit
Deflection Temperature Under Load (1.8 MPa, Unannealed)100°C
Thermal Conductivity 1.0W/m/K
Maximum Operating Temperature - Intermittent 190°C
Additional InformationNominal ValueUnit
Loss Factor - 1 kHz 0.0140
ElectricalNominal ValueUnitTest Method
Surface Resistivity > 1.0E+16ohms
Volume Resistivity 9.5E+15ohms·cm
Dielectric Strength 3(3.18 mm)15kV/mm
Dielectric Constant (1 kHz)3.50
Dissipation Factor (1 kHz)4.0E-3
Arc Resistance 180sec
FlammabilityNominal ValueUnitTest Method
Flame Rating (1.59 mm)HBUL 94
ThermosetNominal ValueUnit
Shelf Life 4
    5°C 52wk
    25°C 1.0wk
    35°C 0.29wk
Uncured PropertiesNominal ValueUnit
Curing Time
    150°C 50.011hr
    150°C 0.017 to 0.050hr
InjectionNominal ValueUnit
Processing (Melt) Temp 150 to 180°C
Injection Pressure 0.345 to 6.89MPa
Note Message
1 .Molded
2 .Powder
3 .Method A (Short-Time)
4 .Defined as not more than 40% loss of spiral flow based on original values.
5 .Hot Plate Cure Time
Resin Grade Manufacturer Category Trademark
XENOY™ CL101 resin SABIC Innovative Plastics Europe PC+PBT XENOY™
Unichem 8711G-02 Colorite Polymers PVC, Flexible Unichem
APICAL 100AVY Kaneka North America LLC Film, PI APICAL
ENVIROLOY® ENV15-NC790 ENVIROPLAS®, Inc. PC+ABS ENVIROLOY®
OnFlex™ S FR 80A-3S1892 PolyOne Corporation TPE OnFlex™