Order Products : sales@su-jiao.com
WPP PP PPC2GF4-Natural
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Dgq4A0_WPP-PP-PPC2GF4-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Properties shown below for this filled blend are typical for a 43% fiberglass reinforced polypropylene copolymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 67.0 | MPa | ASTM D638 |
| Flexural Modulus 2 | 6200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Multi-Axial Instrumented Impact Energy (-30°C) | 9.00 | J | GM 9300P |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 145 | °C | ASTM D648 |
| Additional Information |
|---|
| Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene HP521-229UV | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| TECHNYL® A 30H1 V30 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Sumitomo Epoxy E 8354A-1 | Sumitomo Bakelite North America, Inc. | Epoxy | Sumitomo Epoxy |
| ENFLEX V1075A BLK UV | ENPLAST Americas, a Ravago Group Company | TPV | ENFLEX |
| Sylvin 8773-60D Brown 7362 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
