Order Products : sales@su-jiao.com
Kazan LDPE 16214-020 OKP 22 111 3401
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DgGsCz_Kazan-LDPE-16214-020-OKP-22-111-3401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.921 to 0.925 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | |
| Extractables 1 | < 0.4 | % | |
| Melt Flow - Dispersin within a batch 2 | < 6.0 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 2.00 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 108 | MPa | |
| Break | > 113 | MPa | |
| Tensile Strain (Break) | > 600 | % |
| Note Message | |
|---|---|
| 1 . | Premium grade, Grade I, II |
| 2 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymer-E M5100 | Asia Polymer Corporation (APC) | LDPE | Polymer-E |
| Restren ABS 766/V0 | Polimarky Spolka Jawna | ABS | Restren |
| TEREZ PA 6 7850 TD | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Amilan® EA1R21G33 | Toray Resin Company | Nylon 6 | Amilan® |
| Geon™ Vinyl Wire & Cable W1349L | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |
