Order Products : sales@su-jiao.com
Shuman ABS SP790
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Shuman Plastics, Inc. |
| Trademark: | Shuman ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DfHoRg_Shuman-ABS-SP790.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ABS FLAME RETARDANT SP790 BLACK AND CUSTOM COLORS OFFERS THIS COMBINATION OF PROPERTIES:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 1.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 9.3E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (CTI) (2.54 mm) | 250 | V | UL 746 |
| High Amp Arc Ignition (HAI) (2.54 mm) | 199 | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) (2.54 mm) | 149 | mm/min | UL 746 |
| Hot-wire Ignition (HWI) (2.57 mm) | 33 | sec | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (2.54 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 - 93.3 | °C | |
| Drying Time | 2.0 - 24 | hr | |
| Processing (Melt) Temp | 204 - 227 | °C |
| Injection instructions |
|---|
| Tray Dryer Drying Temperature, No Standard, 1.5 in: 170 to 200°FTray Dryer Drying Time, No Standard, 1.5 in: 4 to 24hrs |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 - 93.3 | °C | |
| Drying Time | 2.0 - 24 | hr | |
| Melt Temperature | 177 - 216 | °C |
| Extrusion instructions |
|---|
| Tray Dryer Drying Temperature, No Standard, 1.5 in: 170 to 200°FTray Dryer Drying Time, No Standard, 1.5 in: 4 to 24hrs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNISOFT TPE™ ST-93A-CL-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| AKROMID® B28 GM 10/20 1 LA black (4790) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Diakon® Frost 952 70 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| Hybrid B2026I | Ravago Manufacturing Americas, LLC | PC+PBT | Hybrid |
| KEBAFLEX® P D35.1 | BARLOG plastics GmbH | TPC-ET | KEBAFLEX® |
