CYCOM® 890 RTM

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	CYCOM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Dbn7IE_CYCOM-890-RTM.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
CYCOM® 890 RTM is a one-part liquid epoxy resin system. It has one month out-life at room temperature which reduces the time required for the freeze-thaw-storage processes in a production environment. Its frozen storage shelf-life is 12 months at -18°C (0°F). CYCOM 890 RTM's viscosity is low enough at 80°C (175°F) to allow injection without excessive heating of either the resin or the transfer pipework. When the resin is heated to cure temperature its viscosity is further reduced, helping to ensure full wet-out of the reinforcing fibers. CYCOM 890 RTM is fully cured after two hours at 180°C (355°F) after which it will have a continuous dry service performance of 170°C (338°F) and a continuous hot/wet service performance of 160°C (320°F) If needed, an optional free-standing postcure for two hours at 200°C (390°F) can be used. After postcure the resin will have a continuous dry service performance of 195°C (383°F) and a continuous hot/wet service performance of 170°C (338°F). CYCOM 890 RTM is compatible with the range of reinforcing fibers used in manufacturing composite components, i.e., carbon, glass, aramid, etc. A fully compatible binder system, CYCOM® 7720 has been developed for use with CYCOM 890 RTM. The binder is available pre-coated onto fabric. A separate datasheet for CYCOM 7720 is available on request.

Message

CYCOM® 890 RTM is a one-part liquid epoxy resin system. It has one month out-life at room temperature which reduces the time required for the freeze-thaw-storage processes in a production environment. Its frozen storage shelf-life is 12 months at -18°C (0°F).

CYCOM 890 RTM's viscosity is low enough at 80°C (175°F) to allow injection without excessive heating of either the resin or the transfer pipework. When the resin is heated to cure temperature its viscosity is further reduced, helping to ensure full wet-out of the reinforcing fibers. CYCOM 890 RTM is fully cured after two hours at 180°C (355°F) after which it will have a continuous dry service performance of 170°C (338°F) and a continuous hot/wet service performance of 160°C (320°F)

If needed, an optional free-standing postcure for two hours at 200°C (390°F) can be used. After postcure the resin will have a continuous dry service performance of 195°C (383°F) and a continuous hot/wet service performance of 170°C (338°F). CYCOM 890 RTM is compatible with the range of reinforcing fibers used in manufacturing composite components, i.e., carbon, glass, aramid, etc.

A fully compatible binder system, CYCOM® 7720 has been developed for use with CYCOM 890 RTM. The binder is available pre-coated onto fabric. A separate datasheet for CYCOM 7720 is available on request.

General Information
Features	Heat Cure Low Viscosity
Uses	Aerospace Applications Fittings Housings
Forms	Liquid

Physical	Nominal Value	Unit
Specific Gravity ¹	1.22	g/cm³

Mechanical	Nominal Value	Unit
Tensile Modulus ²(24°C)	3030	MPa
Tensile Strength ³(24°C)	68.9	MPa
Tensile Elongation ⁴(Break)	6.3	%
Flexural Modulus ⁵	3130	MPa
Flexural Strength ⁶	136	MPa
Shear Modulus ⁷	1170	MPa

Note Message
1 .	Neat Resin
2 .	Neat Resin
3 .	Neat Resin
4 .	Neat Resin
5 .	Neat Resin
6 .	Neat Resin
7 .	Neat Resin, 180°F

Resin Grade	Manufacturer	Category	Trademark
Shandong PP PG6301	Shandong Dongchen Engineering Plastics Co., Ltd.	PP, Unspecified	Shandong PP
ADPOLY EM-520M	Lotte Chemical Corporation	LLDPE	ADPOLY
Chiao Fu PP PP212LB NAT	Chiao Fu Enterprises Co., Ltd.	PP, Unspecified	Chiao Fu PP
LNP™ THERMOCOMP™ VF008A compound	SABIC Innovative Plastics	Nylon 66	LNP™ THERMOCOMP™
Moplen HP6047	HMC Polymers	PP Impact Copolymer	Moplen