Order Products : sales@su-jiao.com

Carbo-Rite™ M-530

Category:	PS (HIPS) , High Impact Polystyrene
Manufacturer:	Lubrizol Advanced Materials, Inc.
Trademark:	Carbo-Rite™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DYVadB_Carbo-Rite-M-530.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Carbo-Rite™ M-530 is a conductive carbon filled high impact polystyrene available as extruded sheet. Thermoformed trays are lightweight and easily thermoformed into deep pockets that maintain uniform static protection. Carbo-Rite™ M-530 is high in stiffness and ensures uniform pocket formation when dimensional tolerance is critical. Product Format: Carbo-Rite™ M530 is available in customer extruded gauges from 0.012 to 0.080 inch and widths of 10 to 48 inches. Product is typically provided as rollstock with a smooth surface finished. Cut-sheets are also available.

Message

Carbo-Rite™ M-530 is a conductive carbon filled high impact polystyrene available as extruded sheet. Thermoformed trays are lightweight and easily thermoformed into deep pockets that maintain uniform static protection. Carbo-Rite™ M-530 is high in stiffness and ensures uniform pocket formation when dimensional tolerance is critical.

Product Format:

Carbo-Rite™ M530 is available in customer extruded gauges from 0.012 to 0.080 inch and widths of 10 to 48 inches. Product is typically provided as rollstock with a smooth surface finished. Cut-sheets are also available.

General Information
Additive	Carbon Black
Features	Electrically Conductive High Gloss High Impact Resistance High Stiffness
Uses	Electrical/Electronic Applications Packaging Support Trays Tape
Appearance	Black
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.09	g/cm³	ASTM D792

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	940	MPa	ASTM D638
Tensile Strength (Yield)	24.0	MPa	ASTM D638
Tensile Elongation (Break)	10	%	ASTM D638

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	7.0E+3	ohms	ESD STM11.11
Volume Resistivity	9.0E+5	ohms·cm	ESD STM11.12
Static Decay - 1000 V to 10 V ¹	< 0.1	sec

Note Message
1 .	Charged Plate Monitor

Resin Grade	Manufacturer	Category	Trademark
Tecoform® PO30 GB30 NL HS	Eurotec Engineering Plastics	Acetal (POM) Copolymer	Tecoform®
Styropor® F 395 E	BASF Corporation	PS (EPS)	Styropor®
TIPELIN® FS 471-02	MOL Petrochemicals Co. Ltd.	HDPE	TIPELIN®
ENGAGE™ 8207	The Dow Chemical Company	TPO (POE)	ENGAGE™
Hostacom SP98F/94	LyondellBasell Industries	TPO (POE)	Hostacom