Order Products : sales@su-jiao.com
EMAREX® 300 GF13
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | MRC Polymers, Inc. |
| Trademark: | EMAREX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DXpnMa_EMAREX-300-GF13.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Further information and details are available upon request.
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.2 | % | ASTM D570 |
| Relative Viscosity | 50 | mPa·s | ASTM D789 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 86.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 3790 | MPa | ASTM D790 |
| Flexural Strength | 138 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 213 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 193 | °C | ASTM D648 |
| Melting Temperature | 215 | °C | ASTM D789 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.18 | % | |
| Rear Temperature | 249 - 271 | °C | |
| Middle Temperature | 260 - 282 | °C | |
| Front Temperature | 271 - 293 | °C | |
| Nozzle Temperature | 271 - 293 | °C | |
| Processing (Melt) Temp | 260 - 282 | °C | |
| Mold Temperature | 37.8 - 93.3 | °C | |
| Injection Pressure | 6.89 - 138 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.00 - 0.517 | MPa | |
| Screw Speed | 30 - 75 | rpm | |
| Cushion | 6.35 | mm |
| Injection instructions |
|---|
| Packing: 50 - 75% of injection pressureHold: 40 - 60% of injection pressureAirflow Rate: 0.8 - 1.0 CFM per lb/hour resin processed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3967H | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Sindustris ABS LAP274 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Lotrène® LLDPE Q2018H | QATOFIN Company Limited | LLDPE | Lotrène® LLDPE |
| Panlite® LV-2225L | TEIJIN LIMITED | PC | Panlite® |
| Sylvin 9653-50 Red 6258 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
