Order Products : sales@su-jiao.com
Generic PPE+PS - Glass\Mineral
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DXG9xW_Generic-PPE-PS---Glass-Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPE+PS - Glass\Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 - 1.43 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.15 - 0.28 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.060 - 0.080 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 83 - 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 72.4 - 127 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 1.5 - 2.1 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6550 - 10500 | MPa | ASTM D790 |
| Coefficient of Friction | 0.40 - 0.55 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 50 - 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 - 125 | °C | ASTM D648 |
| CLTE - Flow | 2.2E-5 - 2.4E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 9.8E+16 - 1.0E+17 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 - 110 | °C | |
| Drying Time | 3.5 - 3.6 | hr | |
| Rear Temperature | 250 - 283 | °C | |
| Middle Temperature | 270 - 291 | °C | |
| Front Temperature | 290 - 299 | °C | |
| Nozzle Temperature | 304 - 305 | °C | |
| Processing (Melt) Temp | 289 - 305 | °C | |
| Mold Temperature | 90.0 - 90.8 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPE+PS - Glass\MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN601G15 | RJM International, Inc. | Nylon 66 | RJM |
| Skyrol® SH52 | SKC Inc. | PET | Skyrol® |
| Trilliant™ HC 5410-0030RS Natural | PolyOne Corporation | HDPE | Trilliant™ HC |
| Bergamid™ A70 G33 TM-X BK079 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Hypro® PP- CP 35/1.5C | Entec Polymers | PP Impact Copolymer | Hypro® |
