Order Products : sales@su-jiao.com

Tufel® II 94305

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Tufel® II
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DUVYBG_Tufel-II-94305.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Tufel II 94305 Rubber Compounds 94205 and 94305 are 20 and 30 durometer low volatile, fast-cure, addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements. Key Features and Benefits LV Bases Minimize Post Cure Times Totally Peroxide-Free Cure System Significant Reduction in Molding Cycle Systems Lower Molding Temperature Range (150-166C) (300-330F) Superior Mixed Shelf Life Tight Surface Cure Non-blooming Translucency

Message

Tufel II 94305 Rubber Compounds 94205 and 94305 are 20 and 30 durometer low volatile, fast-cure, addition cured silicone elastomers for molding. They may be used by themselves or blended to intermediate durometers. Applications include fabricated molding that require short cycle time, deep section cures, and parts with low extractable requirements.

Key Features and Benefits

LV Bases Minimize Post Cure Times

Totally Peroxide-Free Cure System

Significant Reduction in Molding Cycle Systems

Lower Molding Temperature Range (150-166C) (300-330F)

Superior Mixed Shelf Life

Tight Surface Cure

Non-blooming

Translucency

General Information
Features	Fast Cure Fast Molding Cycle Low Extractables Non-Blooming
Agency Ratings	FDA 21 CFR 177.2600 USP Class VI
Appearance	Translucent

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	28		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.600	MPa	ASTM D412
Tensile Strength	9.30	MPa	ASTM D412
Tensile Elongation (Break)	1100	%	ASTM D412
Tear Strength ¹	30.0	kN/m	ASTM D624

Uncured Properties	Nominal Value	Unit
Density	1.10	g/cm³

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Tecomid® HT NT40 NL	Eurotec Engineering Plastics	PPA	Tecomid® HT
Sylvin 60509 Natural	Sylvin Technologies Incorporated	PVC+NBR	Sylvin
TRIBOCOMP® PA66 GF40 TS5	EPIC Polymers	Nylon 66	TRIBOCOMP®
LONGLITE® LCP LCP-300 N4G	CCP Group	LCP	LONGLITE® LCP
Sylvin 8260-75 Blue 8341	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin