Order Products : sales@su-jiao.com
EASYPOXY® K-22
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | EASYPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DTuZTy_EASYPOXY-K-22.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EASYPOXY K-22 is a general purpose, two-component, room-temperature curing adhesive/sealant that bonds a wide variety of surfaces. EASYPOXY K-22 is relatively insensitive to mixing ratios. Since there are no solvents, there is no fire hazard. EASYPOXY K-22 is non-toxic when cured and is widely used for bonding, sealing, and repairing metal, wood, rubber, and most plastics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | |
| Molding Shrinkage - Flow | 0.70 | % | |
| Water Absorption 1(25°C, 24 hr) | 0.40 | % | |
| Viscosity | |||
| Part A : 25°C | Paste | ||
| Part B : 25°C | Paste |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Fungal Resistance | Non-nutrient |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 20.7 | MPa | |
| Flexural Strength | 41.4 | MPa | |
| Compressive Strength | 68.9 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.24 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity (25°C) | 4.0E+13 | ohms·cm | |
| Dielectric Constant (25°C, 1 kHz) | 4.60 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.012 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 45 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (25°C) | 20 | min | |
| Shelf Life | 78 | wk | |
| Demold Time | |||
| 25°C | 1400 | min | |
| 65°C | 120 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Lap Shear Strength 2 | |||
| -55°C | 11.0 | MPa | |
| 25°C | 17.2 | MPa | |
| 82°C | 15.9 | MPa |
| Note Message | |
|---|---|
| 1 . | Immersion |
| 2 . | Etched AL/AL |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinite® PET T102G30 | Shinkong Synthetic Fiber Corp. | PET | Shinite® PET |
| Starflam AFR200B | Eurostar Engineering Plastics | Nylon 66 | Starflam |
| NuSil MED-1131 | NuSil Technology | Silicone | NuSil |
| Abstron HR60N | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Lupoy® 3030-15 | LG Chem Ltd. | PC | Lupoy® |
