Order Products : sales@su-jiao.com
Multi-Flex® TPE A6221
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DTKEGG_Multi-Flex-TPE-A6221.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE A6221 is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 59 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.38 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Tear Strength | 24.5 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 51.7 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 199 | °C | |
| Middle Temperature | 204 | °C | |
| Front Temperature | 210 | °C | |
| Nozzle Temperature | 210 | °C | |
| Processing (Melt) Temp | 210 | °C | |
| Mold Temperature | 26.7 to 43.3 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime Cor-X PP | Primex Plastics Corporation | PP, Unspecified | Prime Cor-X |
| RTP 3499-3 X 102947 B | RTP Company | LCP | RTP |
| Yanshan PE SD330 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Cosmic Alkyd 3D36 | Cosmic Plastics, Inc. | Alkyd | Cosmic Alkyd |
| MAGNUM™ 3416 SC | Trinseo | ABS | MAGNUM™ |
