Order Products : sales@su-jiao.com
Trithene® SX 9003
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Petroquimica Triunfo |
| Trademark: | Trithene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DQs761_Trithene-SX-9003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Trithene®SX 9003 is a medium density polyethylene material,. This product is available in Latin America and is processed by blow molding. Trithene®The main features of SX 9003 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.929 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 13.5 | MPa | ASTM D638 |
| Fracture, molding | 17.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 550 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 116 | °C |
| Additional Information |
|---|
| Melt Mass-Flow Rate, ASTM D1238, 190°C/2.16 kg: 0.25 to 0.35 g/10 minDensity, ASTM D1505: 0.928 to 0.930 g/cm³ |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 180 | °C | |
| Middle Temperature | 150 - 180 | °C | |
| Front Temperature | 150 - 180 | °C |
| Injection instructions |
|---|
| Processing parameters are for blow molding. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime Polypro™ F113G | Prime Polymer Co., Ltd. | PP Homopolymer | Prime Polypro™ |
| Moldex® QS262D/QCM240 | Mitsubishi Chemical Corporation | Polyolefin, Unspecified | Moldex® |
| Ebalta MG 128 / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| ESTADIENE 3510 HT | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
| Isocor™ HW69SI | Shakespeare Monofilaments and Specialty Polymers | Nylon 610 | Isocor™ |
