Order Products : sales@su-jiao.com
S&E PVC GA-1008
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DQPPBc_S-E-PVC-GA-1008.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| S & E PVC GA-1008 is a polyvinyl chloride product,. It is available in North America. Typical application areas are: wire and cable. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 91 | ASTM D2240 | |
| Shaw A, 15 seconds | 86 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 10.0 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 15.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 330 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -22.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.5E+13 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 25 | % | ASTM D2863 |
| Additional Information |
|---|
| Suggested Stock Temperature: 370°FTemperature Rating: 80°CMin. Wall Thickness: 0.03 inches |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 685 HB | RTP Company | ABS | RTP |
| S&E Automotive XP23-45MG | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Automotive |
| Zetpol® 1000L | Zeon Chemicals L.P. | NBR | Zetpol® |
| DynaPath™ C3850CF | Polymer Dynamix | PPS | DynaPath™ |
| ELASTOSIL® R 701/50 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
