Order Products : sales@su-jiao.com
OP - ABS ABS FR 15SS
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DNo4vx_OP---ABS-ABS-FR-15SS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EMI / ESD SHIELDING |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 28.3 | MPa | ASTM D638 |
| Fracture | 28.3 | MPa | ASTM D638 |
| Flexural Modulus | 2830 | MPa | ASTM D790 |
| Flexural Strength | 40.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (4°C) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.18mm | 104 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.18mm | 90.6 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-0 | UL 94 | |
| 3.18 mm | V-0 | UL 94 |
| Additional Information |
|---|
| Melt Mass- Flow Rate (MFR), ASTM D1238, 230°C/ 3.8kg: 10 to 20 g/10 minSurface Resitivity, ASTM D257: 1E1 to 1E2 ohms |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 188 - 210 | °C | |
| Middle Temperature | 204 - 227 | °C | |
| Front Temperature | 216 - 249 | °C | |
| Processing (Melt) Temp | 218 - 249 | °C | |
| Mold Temperature | 48.9 - 82.2 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DAI-EL™ G-7251 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Durethan® AC 30 DUS027 000000 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
| Globalprene® 1484F | Lee Chang Yung Chemical Industry Corp. | SBS | Globalprene® |
| EnCom ABS 3077 | EnCom, Inc. | ABS | EnCom |
| ICORENE® N1005 | ICO Polymers EMEA, A Division of A. Schulman | EVA | ICORENE® |
