Order Products : sales@su-jiao.com
Lucent PA NP6-140
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Lucent Polymers, Inc. |
| Trademark: | Lucent PA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DMLAgs_Lucent-PA-NP6-140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
15% Glass/25% Mineral Renforced Nylon 6 Colors Available Add "H" for Heat Stabilized Add "HU" for Weatherable Typical Properties, Dry as Molded Meets GMP.PA6.013 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.0 | % | ASTM D638 |
| Flexural Modulus | 6210 | MPa | ASTM D790 |
| Flexural Strength | 152 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 194 | °C | ASTM D648 |
| Peak Melting Temperature | 216 to 225 | °C | ASTM D789 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULADUR® E GF 50 SCHWARZ | A. Schulman Europe | PET | SCHULADUR® |
| Stanyl® TW363 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Addisil™ 2080 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| KOPLA PP KPT1030 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
| LITEN FL 20 | UNIPETROL RPA | MDPE | LITEN |
