Order Products : sales@su-jiao.com
Alpha PVC 3006-90 CLEAR 0217
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DLrY7q_Alpha-PVC-3006-90-CLEAR-0217.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALPHA PVC 3006-90 CLEAR is a flexible vinyl compound produced with FDA sanctioned raw materials. Designed with high flow for injection molding, PVC 3006 features sparkling clarity, high thermal stability, and easy mold release. The formula is available in a wide range of hardnesses and is the preferred grade for such demanding applications as drip chambers, tubing caps and connectors. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 - 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 120 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 10 seconds, 3.18mm | 87 - 93 | ASTM D2240 | |
| Shaw A, 15 seconds, 6.35mm | 86 - 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant | 12.4 | MPa | ASTM D638 |
| Tensile Strength | 17.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 270 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | 3.00 | °C | ASTM D746 |
| Vicat Softening Temperature | 66.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 143 | °C | |
| Middle Temperature | 154 | °C | |
| Front Temperature | 160 | °C | |
| Nozzle Temperature | 171 | °C | |
| Processing (Melt) Temp | 166 - 177 | °C |
| Injection instructions |
|---|
| Zone 4: 330°FZone 5: 330°F |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 143 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 166 | °C | |
| Cylinder Zone 5 Temp. | 166 | °C | |
| Adapter Temperature | 171 | °C | |
| Melt Temperature | 166 - 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Borealis PP HC101BF | Borealis AG | PP Homopolymer | Borealis PP |
| CGPC PVC R-11X HI Extrusion | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| DINAPLEN® PPC1S15 G30 | Grupo Repol | PP Copolymer | DINAPLEN® |
| LUVOCOM® 1105-7720/BE | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Petrothene® GA568200 | LyondellBasell Industries | LLDPE | Petrothene® |
