Order Products : sales@su-jiao.com
Ablefilm 561K
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Henkel Ablestik |
| Trademark: | Ablefilm |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DLaVxG_Ablefilm-561K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ABLEFILM® 561K is designed for substrate attach and heat sink bonding. This adhesive film is designed for bonding materials with severely mismatched coefficients of thermal expansion. All data and results will vary with different thicknesses. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Water Absorption (Equilibrium, 85°C, 85%RH) | 0.90 | % | |
| pH | 8.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Carrier | Glass fabric | ||
| Ionic Chloride (100°C) | 110 | ppm | |
| Ionic Potassium (100°C) | 9 | ppm | |
| Ionic Sodium | 35 | ppm | |
| Lap Shear 1 | |||
| Al to Al : 25°C | 22.8 | MPa | |
| Au to Au : 25°C | 25.5 | MPa | |
| Volatiles (120°C) 2 | 0.16 | % | |
| Water Extract Conductivity | 110 | µS/cm | |
| Weight Loss on Heating (300°C) | 0.34 | % | |
| Work Life (25°C) | 6.0 | month |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus | |||
| -65°C | 6140 | MPa | |
| 25°C | 4350 | MPa | |
| 150°C | 2000 | MPa | |
| 250°C | 1860 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | 55.0 | °C | |
| CLTE - Flow | |||
| < 55°C | 8.5E-5 | cm/cm/°C | |
| > 55°C | 3.0E-4 | cm/cm/°C | |
| Thermal Conductivity (121°C) | 0.90 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity | 9.1E+12 | ohms·cm | |
| Dielectric Strength (0.0250 mm) | 820 | kV/mm | |
| Dielectric Constant (1 kHz) | 5.70 | ||
| Dissipation Factor (1 kHz) | 0.012 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (-40°C) | 52 | wk | |
| Post Cure Time | |||
| 125°C | 2.0 | hr | |
| 150°C | 0.50 | hr |
| Note Message | |
|---|---|
| 1 . | 1.27 cm overlap |
| 2 . | 10x10 cm sample, 30 mins |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® EVA 1804 | Marco Polo International, Inc. | EVA | MARPOL® EVA |
| Pro-fax SD242 | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
| ExTima™ GP MB PPS 420 | Ovation Polymers Inc. | PPS | ExTima™ |
| HANWHA LLDPE 9730 | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| REV Materials 8008-001 | REV Materials | PP, Unspecified | REV Materials |
