Order Products : sales@su-jiao.com

MAJORIS EW404

Category:	PP, Unspecified , Polypropylene
Manufacturer:	AD majoris
Trademark:	MAJORIS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DLVvyF_MAJORIS-EW404.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EW404 is a 40% mineral fiber reinforced polypropylene compound intended for injection moulding.

EW404 has a medium flow rate, very good processability and excellent mechanical properties.

EW404 has been developed especially for the automotive under the bonnet application requiring excellent long- term heat stability and electrical industry.

APPLICATIONS

Fuse and connector boxes

Miscellaneous electrical components

Household appliances

Automotive climate control parts

Air conditioning parts

Heater housings

Products requiring high rigidity, high dimensional stability and low shrinkage can be made from EW404.

General Information
Filler / Reinforcement	Mineral filler, 40% filler by weight
Features	Good dimensional stability Rigidity, high Recyclable materials Workability, good Medium liquidity Low shrinkage
Uses	Electrical/Electronic Applications Electrical components Electrical appliances Parts under the hood of a car Shell
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.22	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	6250	MPa	ISO 527-2/2
Tensile Stress (Yield)	73.0	MPa	ISO 527-2/50
Tensile Strain (Break)	2.8	%	ISO 527-2/50
Flexural Modulus ¹	6600	MPa	ISO 178
Flexural Stress ²	124	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	8.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	32	kJ/m²	ISO 179/1eU

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Injection	Nominal Value	Unit
Drying Temperature	80.0	°C
Drying Time	3.0	hr
Processing (Melt) Temp	210 - 260	°C
Mold Temperature	30.0 - 50.0	°C
Injection Rate	Moderate

Injection instructions
Holding pressure: 50 to 70% of the injection pressure

Note Message
1 .	2.0 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
ColorRx® PBT-5000RX	LTL Color Compounders, Inc.	PBT	ColorRx®
Electroblend® PBT-1801	Colour Image Plastic Compound Sdn. Bhd. (CIPC)	PBT	Electroblend®
Generic TPSiV	Generic	TPSiV	Generic
Plaslube® PEEK 1041 A	Techmer Engineered Solutions	PEEK	Plaslube®
OTECH ALLOY OT09060LSZH - Riser Jacket	OTECH Corporation	TP, Unspecified	OTECH ALLOY