Order Products : sales@su-jiao.com
Westlake LDPE EC808AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DGsZ8m_Westlake-LDPE-EC808AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EC808 is a general-purpose formulation used for injection molding, general-purpose extrusion coating and laminating. It can be drawn down to low coating weights, is processable at high speeds, has a good moisture barrier, and is heat-sealable at low temperatures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C) | 400 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3(23°C) | 207 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1003 HI | RTP Company | PBT | RTP |
| CoREZYN® CORVE8300-35 | Interplastic Corporation | Vinyl Ester | CoREZYN® |
| CYCOLOY™ CP8320 resin | SABIC Innovative Plastics Europe | PC+ABS | CYCOLOY™ |
| EMPILON® 8899W | EMPILON | SEBS | EMPILON® |
| HiFill® PA6/6 GF8 IM4 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
