Order Products : sales@su-jiao.com
Indothene HD HD55EF010
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene HD |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DGUg7m_Indothene-HD-HD55EF010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-HD HD55EF010 is a high density polyethylene grade produced using the process know-how of M/s. BP Chemicals, specially formulated to manufacture oriented monofilament products. It has narrow molecular weight distribution and has very good processability, less motor load and high output combined with very good elongation and filament properties to make it a grade of choice. FOOD CONTACT APPLICATIONS : This grade meets the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It also conforms to the positive list of constituents as approved in IS:10141:1982. The grade complies with FDA regulation : CFR title 21 , 177.1520, Olefin polymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, 3.20 mm, Injection Molded) | 15 | % | ASTM D638 |
| Flexural Modulus 3(3.20 mm, Injection Molded) | 820 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 220 - 260 | °C | |
| Cylinder Zone 2 Temp. | 220 - 260 | °C | |
| Cylinder Zone 3 Temp. | 220 - 260 | °C | |
| Cylinder Zone 4 Temp. | 220 - 260 | °C | |
| Die Temperature | 240 - 260 | °C |
| Extrusion instructions |
|---|
| Stretching temp (Oven): 80° to 95°CStretch ratio: 6.0 to 8.0 |
| Note Message | |
|---|---|
| 1 . | Type 1 |
| 2 . | Type 1 |
| 3 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide BG4 | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| Tarnamid® T-27 MRS | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| ADEKA CM series | Adeka Corporation | PUR-Ether | ADEKA |
| Hanwha Total PE PE30 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | EVA | Hanwha Total PE |
| LEXAN™ 123R resin | SABIC Innovative Plastics | PC | LEXAN™ |
