Order Products : sales@su-jiao.com
Mecoline I RDX 1213 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DFgzMC_Mecoline-I-RDX-1213-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, highly oil and extra fuel resistant, radiation cross-linkable, flame retardant, max operating temperature 125°C, compound for thin wall insulation of wire for Automotive applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.39 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (150°C/10.0 kg) | 6.0 | g/10 min | ISO 1133 |
| pH | > 4.5 | EN 50267-2-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 10.0 | µS/mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 145 to 165 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 2.0:1.0 to 3.0:1.0 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 47 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | SAE J1128 | ||
| -- 1 | 15.8 | MPa | |
| -- 2 | 7.00 | MPa | |
| Tensile Strain | SAE J1128 | ||
| Break 3 | 220 | % | |
| Break 4 | 670 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (155°C, 168 hr) | 5.0 | % | SAE J1128 |
| Change in Tensile Strain at Break in Air (155°C, 168 hr) | -10 | % | SAE J1128 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.3E+14 | ohms·cm | IEC 60167 |
| Electric Strength | 27 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 30 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 100 to 120 | °C | |
| Cylinder Zone 2 Temp. | 120 to 140 | °C | |
| Cylinder Zone 3 Temp. | 125 to 145 | °C | |
| Cylinder Zone 4 Temp. | 130 to 150 | °C | |
| Cylinder Zone 5 Temp. | 140 to 160 | °C | |
| Adapter Temperature | 145 to 165 | °C | |
| Die Temperature | 150 to 170 | °C |
| Note Message | |
|---|---|
| 1 . | After crosslinking |
| 2 . | Before crosslinking |
| 3 . | After crosslinking |
| 4 . | Before crosslinking |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUPREME HIPS SH03 | Supreme Petrochem Ltd. | PS (HIPS) | SUPREME HIPS |
| NEMCON H ES DP110/X3 | Ovation Polymers Inc. | PC Alloy | NEMCON H |
| ETILINAS HD12BK | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| Koylene SM30N | Reliance Industries Limited | PP Homopolymer | Koylene |
| Eleme NGC400I | Eleme Petrochemical Company Ltd | PP Impact Copolymer | Eleme |
