Order Products : sales@su-jiao.com
AMTOPP CW18
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Inteplast Group |
| Trademark: | AMTOPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DEM1Bn_AMTOPP-CW18.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Solid White Metalizable Base CoEx BIAXIALLY ORIENTED POLYPROPYLENE FILM ONE SIDE SEALABLE FOR FOOD PACKAGING |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Dimensional Stability 1 | |||
| Across Flow, 130°C | < 3.0 | % | |
| Flow, 130°C | < 5.0 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 17 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 138 | MPa | |
| TD : Yield | 221 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 140 | % | |
| TD : Break | 60 | % | |
| Oxygen Transmission Rate (22°C, 0% RH) | 2200 | cm³/m²/24 hr | ASTM D3985 |
| Water Vapor Transmission Rate (38°C, 90% RH) | 7.0 | g/m²/24 hr | ASTM F1249 |
| Yield 2 | 62.3 | m²/kg |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Seal Temperature 3 | 93 | °C | |
| Surface Energy | 40 | dyne/cm | ASTM D2578 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Opacity | 50 | % | ASTM D589 |
| Note Message | |
|---|---|
| 1 . | 5 minutes |
| 2 . | Internal Method |
| 3 . | 1/2 sec, 30 PSI |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIBUR Synthetic Rubber NBR 3335 | SIBUR, LLC | NBR | SIBUR Synthetic Rubber |
| Sylvin 9461-60 Black | Sylvin Technologies Incorporated | PVC+NBR | Sylvin |
| AVP™ ZLL30CP | SABIC Innovative Plastics | PC | AVP™ |
| Ducor® 2348 M | Ducor Petrochemicals BV | PP Impact Copolymer | Ducor® |
| IDI STC 2045 | IDI Composites International | Polyester, TS | IDI STC |
