Order Products : sales@su-jiao.com
Zhongfa POM GR-30
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Yuyao Zhongfa Engineering Plastics Co. Ltd. |
| Trademark: | Zhongfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DBcatt_Zhongfa-POM-GR-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zhongfa POM GR-30 is a polyoxymethylene (POM) copolymer material, and its filler is 30% glass fiber reinforced material. This product is available in the Asia-Pacific region and is processed by injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.62 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.2 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 78.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 6300 | MPa | ASTM D790 |
| Flexural Strength | 124 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 180 | °C | ASTM D648 |
| Additional Information |
|---|
| Notched Izod Impact, ASTM D256: 6 kJ/m² |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 85.0 | °C | |
| Drying Time | 1.0 - 3.0 | hr | |
| Processing (Melt) Temp | 170 - 195 | °C | |
| Mold Temperature | 40.0 - 80.0 | °C | |
| Injection Pressure | 60.0 - 100 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRP2009M | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Titalon® 9600GF | Titan Plastics Compounds Co., Ltd. | PEI | Titalon® |
| Vi-Chem PVC VNC85-30E | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| ULTEM™ HU1110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| LubriOne™ SF-30GF/15T | PolyOne Corporation | PPS | LubriOne™ |
