Order Products : sales@su-jiao.com
Flexane® Fast Cure Rubber Repair Putty
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Devcon |
| Trademark: | Flexane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D9QFdu_Flexane-Fast-Cure-Rubber-Repair-Putty.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A fast-curing, flexible urethane for repairing rubber equipment. Intended Use:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.849 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 220 | mg/1000 cycles |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | |||
| Dry | 82 | °C | |
| Wet | 49 | °C |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.14 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 88 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 16.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Tear Strength | 48.2 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Resin | Mixing ratio by weight: 80 | ||
| Hardening method | Mixing ratio by weight: 20 | ||
| Pot Life (24°C) | 8.0 | min |
| Additional Information |
|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 3.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 264 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| UBE Nylon 1024JI | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| Hanwha Total PE 4141W | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LLDPE | Hanwha Total PE |
| MACOMASS PVC MM-PVC E 1595 | MACOMASS Verkaufs AG | PVC, Flexible | MACOMASS PVC |
| ULTEM™ ATX200 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
