Order Products : sales@su-jiao.com
Sinvicomp SZF5009C
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D94kvd_Sinvicomp-SZF5009C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp"SZF 5009C is a wire & cable polyvinylchloride compound available in pellet form. SZF 5009C provides good performance for jacketing of cables. |
| General Information | |
|---|---|
| Uses |
|
| Cable Type (IEC 60502) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 15.0 | MPa | IEC 60811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 100°C, 168 hr 1 | IEC 811-1-2 | ||
| Tensile strength change | 10 | % | IEC 811-1-2 |
| Change in tensile elongation | 15 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -16.0 | °C | ASTM D746 |
| Thermal deformation- 120°C, 1hr (120°C) | 25 | % | BS 6469 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Emission - HCL | 12 | % | IEC 60754-1 |
| Loss of Mass - 7 days, 100±2°C 2(100°C) | 1.40 | mg/cm² | IEC 811-3-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.0E+13 | ohms·cm | BS 2782 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 32 | % | ASTM D2863 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Typical temperature profile for processing SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CCompression zone: 160°C~175°CMixing zone: 175°C~185°CNozzle/Die Zone: 185°C |
| Note Message | |
|---|---|
| 1 . | 100±2°C |
| 2 . | 7 days, 100±2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2407 MAS145 | Covestro - Polycarbonates | PC | Makrolon® |
| Delrin® 500P NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Ferro PP CPP40GH38BK | Ferro Corporation | PP Copolymer | Ferro PP |
| Globalene® TPV 1080A BK | Lee Chang Yung Chemical Industry Corp. | TPV | Globalene® |
| Hanwha Total PP TH52 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
