Order Products : sales@su-jiao.com
Laprene® 830000551
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D8QaeV_Laprene-830000551.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Laprene® 830000551 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Laprene® 830000551: RoHS Compliant. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 33 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 2 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 0.700 | MPa | ASTM D412 |
| Tensile Strength 2 | 4.10 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 820 | % | ASTM D412 |
| Tear Strength 4 | 17.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 45 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 | °C | |
| Middle Temperature | 180 | °C | |
| Front Temperature | 180 | °C | |
| Nozzle Temperature | 190 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW0741M | Teknor Apex Asia Pacific PTE. LTD. | LLDPE | Sinpolene |
| Nanjing Hongrui PBT T401 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PBT | Nanjing Hongrui PBT |
| Latishield 73/13-07A | LATI S.p.A. | Acetal (POM) Copolymer | Latishield |
| ALCOM® PC 740/4 UV WT1081-08LD2 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| OTECH TPO OTR1788-Molding | OTECH Corporation | TPE | OTECH TPO |
