Order Products : sales@su-jiao.com
Jam PE 60505
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D6DwuQ_Jam-PE-60505.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 60505 is a High Density Polyethylene product. It can be processed by injection molding and is available in Africa & Middle East. Typical application: Containers. Primary characteristic: homopolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 to 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 to 6.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | > 30.0 | MPa | |
| Break, Compression Molded | > 16.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 200 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | > 1480 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | > 46 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 78.0 | °C | ASTM D648 |
| Vicat Softening Temperature | > 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultraform® H 2320 006 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Alathon® M6080WC | LyondellBasell Industries | HDPE | Alathon® |
| APEX® 2595-H | Teknor Apex Company | PVC, Flexible | APEX® |
| Fluoroplex R 25 - GMA | UNIFLON | PTFE | Fluoroplex |
| Plexiglas® Rnew® B522 | Altuglas International of Arkema Inc. | PLA+PMMA | Plexiglas® |
