Order Products : sales@su-jiao.com
Andur 6 APLM/Curene® 442
| Category: | PCL , Polycaprolactone |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D332LI_Andur-6-APLM-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 6 APLM is a polycaprolactone based, toluene diisocyanate terminated prepolymer. This high-performance system yields an elastomer with a hardness of about 60 Shore A when this prepolymer is cured with Curene 442 [4,4'-ethylenebis (orthochloroaniline)]. This system avoids this use of mixed curatives or plasticizers which are usually required to achieve hardnesses in this range, thereby, resulting in ultra high-performance properties. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 1.52 | MPa | ASTM D412 |
| 300% strain | 2.07 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Bayshore Resilience | 34 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 6.0 - 9.0 | min | |
| Demold Time (116°C) | 60 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 57 to 62Die C Tear, ASTM D1004: 190 pliAverage Split Tear, ASTM D1938: 80 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 6 APLM: 212°F Curene 442: 230-240°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 104 - 116 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene HP514-197 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Tempalux® 5000 | Westlake Plastics Company | PEI | Tempalux® |
| Xuchuan XCW-8033L | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ADEKA ED-505 | Adeka Corporation | Epoxy | ADEKA |
| MAJORIS GFR307 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
