Order Products : sales@su-jiao.com
Laprene® 8K1000A70
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CzQ3Iq_Laprene-8K1000A70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Laprene® 8K1000A70 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America. Primary attribute of Laprene® 8K1000A70: REACH Compliant. Typical application of Laprene® 8K1000A70: Engineering/Industrial Parts |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 72 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance | 70.0 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 6 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 2.90 | MPa | ASTM D412 |
| Tensile Strength 2 | 12.5 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 550 | % | ASTM D412 |
| Tear Strength 4 | 45.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 220 | °C | |
| Front Temperature | 230 | °C | |
| Nozzle Temperature | 230 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4007 TFE 13 SI 2 | RTP Company | PPA | RTP |
| Terblend® N NM-13 | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| NYLOY® MS-0200B | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| Indothene LL LL 36RA045 UV | Reliance Industries Limited | LLDPE | Indothene LL |
| Iupilon® GSH2020R2 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
