Order Products : sales@su-jiao.com
Tekumid 6 SC/GF 30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TEKUMA Kunststoff GmbH |
| Trademark: | Tekumid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Cya1NH_Tekumid-6-SC-GF-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tekumid 6 SC/GF 30 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Europe. Primary attribute of Tekumid 6 SC/GF 30: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.34 | -- | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | |||
| 23°C, 24 hr | 6.6 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.3 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness | 122 | 112 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Break) | 170 | 110 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.5 | 4.0 | % | ASTM D638 |
| Flexural Modulus | 8000 | 4500 | MPa | ASTM D790 |
| Flexural Strength | 250 | 150 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Unnotched Izod Impact (23°C, 3.20 mm) | 100 | 130 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 215 | -- | °C | |
| 1.8 MPa, Unannealed | 210 | -- | °C | |
| Melting Temperature | 215 to 220 | -- | °C | DSC |
| CLTE - Flow (-30 to 30°C) | 2.3E-5 | -- | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.28 | -- | W/m/K | ASTM C177 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | IEC 60093 |
| Electric Strength | 60 | 40 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 3.80 | -- | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.025 | -- | IEC 60250 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.60 mm | HB | -- | ||
| 3.20 mm | HB | -- | ||
| Glow Wire Ignition Temperature (2.00 mm) | 650 | -- | °C | IEC 60695-2-13 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makroblend® EL700 | Covestro - Polycarbonates | PC+PET | Makroblend® |
| Adell PP EH-18 | Adell Plastics, Inc. | PP, Unspecified | Adell PP |
| DIGITALWAX® RF 080 | DWS Systems | Unspecified | DIGITALWAX® |
| Ferro PP TPP20AE31HB NATURAL | Ferro Corporation | PP Homopolymer | Ferro PP |
| Petrothene® GA501025 | LyondellBasell Industries | LLDPE | Petrothene® |
