Order Products : sales@su-jiao.com
Dryflex® 4097-002
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CyIfrY_Dryflex-4097-002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 4097-002: Thermoplastic Elastomer Base Material: TPS/TPO Hardness: 95 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Natural Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Moderate (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 2781 |
| Molding Shrinkage | 0.75 to 2.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 95 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 9.00 | MPa | ISO 37 |
| Tensile Stress (Yield) | 12.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 900 | % | ISO 37 |
| Tear Strength 1 | 80 | kN/m | ISO 34-1 |
| Compression Set 2 | ISO 815 | ||
| 23°C, 24 hr | 40 | % | |
| 70°C, 24 hr | 60 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 to 210 | °C | |
| Middle Temperature | 170 to 210 | °C | |
| Front Temperature | 170 to 210 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 210 | °C | |
| Cylinder Zone 2 Temp. | 150 to 210 | °C | |
| Cylinder Zone 3 Temp. | 150 to 210 | °C | |
| Cylinder Zone 4 Temp. | 150 to 210 | °C | |
| Cylinder Zone 5 Temp. | 150 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Method C, Crescent |
| 2 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Supol HT345E | LyondellBasell Industries | PP Copolymer | Supol |
| Ultra Purge 9010 | Moulds Plus International USA, Inc. | Proprietary | Ultra Purge |
| Chiao Fu PA66 MD312G23 BK | Chiao Fu Enterprises Co., Ltd. | Nylon 66 | Chiao Fu PA66 |
| Daelim Po1y® TR-570 | DAELIM INDUSTRIAL CO., LTD. | HDPE, HMW | Daelim Po1y® |
| IPC PP 4840H-MGF10 Black | International Polymers Corporation | PP, Unspecified | IPC PP |
