Order Products : sales@su-jiao.com
UNITREX® HiTemp
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Nytef Plastics, Ltd. |
| Trademark: | UNITREX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CxT32l_UNITREX-HiTemp.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITREX HiTemp extruded thermoplastic shapes provide users with the toughness, strength and chemical resistance inherent in unfilled PEEK as well as enhanced heat resistance for use in elevated temperature environments. UNITREX HiTemp shapes offer Continuous Use Temperatures of up to 500 ° F (260 ° C). UNITREX HiTemp is available in multiple rod and plate configurations by special order. Minimum order quantities may apply, dependent on product configuration. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | < 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 88 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 110 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 20 | % | ASTM D638 |
| Flexural Modulus | 4550 | MPa | ASTM D790 |
| Flexural Strength | 193 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 170 | °C | ASTM D648 |
| Continuous Use Temperature | 260 | °C | |
| Glass Transition Temperature | 160 | °C | ASTM D3418 |
| CLTE - Flow | 2.2E-5 | cm/cm/°C | ASTM D696 |
| RTI Str | 260 | °C | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Smoke Density | < 10 | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermec™ 4150R60 | Technical Polymers, LLC | PPS | Thermec™ |
| Jackdaw ABS GX10BL6576 | Jackdaw Polymers | ABS | Jackdaw ABS |
| LubriOne™ ATH-000/18T 2S | PolyOne Corporation | Acetal (POM) Homopolymer | LubriOne™ |
| LUVOCOM® 1301-8148 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| Alpha PVC 2222RX-75 | Mexichem Specialty Compounds Inc. | PVC, Unspecified | Alpha PVC |
