Order Products : sales@su-jiao.com
Andur 6500 DPLF
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CtgWyw_Andur-6500-DPLF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 6500 DPLF is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer containing 0.1% or less TDI monomer. An elastomer with a hardness of 65 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 700 | cP | ASTM D2393 |
| 100°C | 150 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 7.55%Specific Gravity, ASTM D792, 77°F: 1.115 g/mlSpecific Gravity, ASTM D792, 212°F: 1.042 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMSHINE PV504WT | Polyram Ram-On Industries | ABS | RAMSHINE |
| Novodur® 595CP | Styrolution | ABS | Novodur® |
| Chiao Fu PA66 MD212STG33 NAT | Chiao Fu Enterprises Co., Ltd. | Nylon 66 | Chiao Fu PA66 |
| ALTECH® PC ECO 2020/140 | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
| 3M™ Dyneon™ Perfluoroelastomer PFE 7104BZ | 3M Advanced Materials Division | Perfluoroelastomer | 3M™ Dyneon™ Perfluoroelastomer |
