Order Products : sales@su-jiao.com
UNITHENE® LH614
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | USI Corporation |
| Trademark: | UNITHENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Cn98EF_UNITHENE-LH614.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITHENE LH614(HDPE) having high melt flow index suitable used for injection molding and the applications are thin and smart housewares, toys, etc. UNITHENE LH614 possesses good processability, high impact strength and good resistance to stress cracking, good stiffness, high hardness, good surface gloss, less warpage, low shrinkage. UNITHENE LH614 can be easily pigmented to any color by either dry blending or melt blending of the pigment into the resin. Printing on items molded from UNITHENE LH614 can be easily accomplished after flame, chemical or electronic surface treatment. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Compression Molded) | 981 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 30.4 | MPa | ASTM D638 |
| Fracture | 14.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 170 | % | ASTM D638 |
| Apparent Bending Modulus | 961 | MPa | ASTM D747 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 34 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Peak Melting Temperature | 135 | °C | ASTM D3418 |
| Additional Information |
|---|
| Torsional Stiffness, ASTM D1043: 12100 kg/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 DEL | RTP Company | Acetal (POM) Homopolymer | RTP |
| TEREZ PA 6 7510 GF 15 GK 15 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Zhongfa PA6 BZR8 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | Nylon 6 | Zhongfa |
| Dryflex® A2 660601 | ELASTO | SEBS | Dryflex® |
| HiFill® PA6 GF/M55 HS L BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
