Order Products : sales@su-jiao.com
Ravago Compounds GFP-4413
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Ravago Manufacturing Americas, LLC |
| Trademark: | Ravago Compounds |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ch1tGq_Ravago-Compounds-GFP-4413.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GFP-4413 is 30% glass fiber reinforced, chemically coupled, polypropylene homopolymer. GFP-4413 is designed for injection molding applications requiring superior stiffness and good dimensional stability. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 3.5 | % | ASTM D638 |
| Flexural Modulus - Tangent (23°C) | 5850 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 134 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 470 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 157 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 152 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 87.8 | °C | |
| Rear Temperature | 193 - 204 | °C | |
| Middle Temperature | 204 - 232 | °C | |
| Front Temperature | 204 - 232 | °C | |
| Nozzle Temperature | 193 - 221 | °C | |
| Mold Temperature | 46.1 - 60.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.00 - 0.689 | MPa | |
| Screw Speed | 100 - 150 | rpm |
| Injection instructions |
|---|
| Drying: Not usually needed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENYL SG307 - 8139 | AD majoris | Nylon 6 | VENYL |
| Novalloy-B B2706 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
| CEFOR™ 1220P | The Dow Chemical Company | LLDPE | CEFOR™ |
| DIGITALWAX® DC 500 | DWS Systems | Unspecified | DIGITALWAX® |
| PETILEN G08-21TA | PETKIM Petrokimya Holding A.S. | LDPE | PETILEN |
