Order Products : sales@su-jiao.com
Tuftec™ P5051
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Tuftec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CfhSfu_TuftecP5051.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Asahi Kasei Tuftec™ P5051 is a selectively hydrogenated polymer. It is used as a compatibilizer of PS and PP blends or as an impact modifier of GPPS, HIPS and PPE. Applications: Primarily for compatibilization between styrenic and olefinic polymers. Properties highly advantageous for food container applications, e.g. microwave food trays, portioned food containers, lunchbox laminated films. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 93 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 7.00 | MPa | ISO 37 |
| Tensile Stress 1(Break) | 31.0 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 700 | % | ISO 37 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Styrene/Rubber ratio | 47/53 | Internal method |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500mm/min |
| 2 . | Type 1A, 500mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILPURAN® 6000/40 A/B | Wacker Chemie AG | Silicone | SILPURAN® |
| ACCUCOMP™ HP0309L | ACLO Compounders Inc. | PP Homopolymer | ACCUCOMP™ |
| Geon™ Vinyl Flexible B6500 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Karina IVORY PVC COMP. 806-35/ 2-F-IS | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Plenco 00714 (Compression) | Plastics Engineering Co. | Mel Phenolic | Plenco |
