Order Products : sales@su-jiao.com
CABELEC® CC6057
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Cabot Corporation |
| Trademark: | CABELEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CfTeXX_CABELEC-CC6057.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CABELEC CC6057 conductive concentrate is an electrically conductive concentrate, made from carbon black and a polypropylene copolymer. The concentrate can be diluted at high levels depending on the processing conditions and the targeted specification for the electrical resistivity. Its electrical and mechanical properties are not dependent on atmospheric conditions. Applications CABELEC CC6057 conductive concentrate can be used in extrusion applications such as sheets and corrugated sheets for packaging electronics, where freedom from the hazard of electrostatic discharge is required. CABELEC CC6057 conductive concentrate can also be used for injection moulding applications such as pallets or boxes where it can be diluted at high rates with natural or even recycled polypropylene. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.13 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 230°C/10.0 kg | 3.0 | g/10 min | |
| 230°C/21.6 kg | 74 | g/10 min | |
| 230°C/5.0 kg | 0.30 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded 2 | 26.5 | MPa | |
| Yield, Injection Molded 3 | 27.1 | MPa | |
| Yield, Injection Molded 4 | 27.4 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Break, Injection Molded 5 | 250 | % | |
| Break, Injection Molded 6 | 180 | % | |
| Break, Injection Molded 7 | 120 | % | |
| Flexural Modulus | ISO 178 | ||
| Injection Molded 8 | 1230 | MPa | |
| Injection Molded 9 | 1290 | MPa | |
| Injection Molded 10 | 1280 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact Strength | ISO 180 | ||
| Injection Molded 11 | 80 | kJ/m² | |
| Injection Molded 12 | 75 | kJ/m² | |
| Injection Molded 13 | 60 | kJ/m² |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | Internal Method | ||
| -- 14 | 26 | ohms | |
| 0.400 mm 15 | 1.3E+5 | ohms | |
| 0.400 mm 16 | 5.6E+3 | ohms | |
| 0.400 mm 17 | 5.7E+2 | ohms | |
| Volume Resistivity 18 | 1.2 | ohms·cm | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Nozzle Temperature | 220 | °C | |
| Processing (Melt) Temp | 200 to 220 | °C | |
| Mold Temperature | 30.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 190 to 220 | °C | |
| Cylinder Zone 2 Temp. | 190 to 220 | °C | |
| Cylinder Zone 3 Temp. | 190 to 220 | °C | |
| Cylinder Zone 4 Temp. | 190 to 220 | °C | |
| Cylinder Zone 5 Temp. | 190 to 220 | °C | |
| Melt Temperature | 190 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | CTM E023 |
| 2 . | Dilution 55% ppc |
| 3 . | Dilution 50% ppc |
| 4 . | Dilution 40% ppc |
| 5 . | Dilution 55% ppc |
| 6 . | Dilution 50% ppc |
| 7 . | Dilution 40% ppc |
| 8 . | Dilution 55% ppc |
| 9 . | Dilution 50% ppc |
| 10 . | Dilution 40% ppc |
| 11 . | Dilution 55% ppc |
| 12 . | Dilution 50% ppc |
| 13 . | Dilution 40% ppc |
| 14 . | CTM E042E |
| 15 . | Dilution 55% ppc, CTM E042D |
| 16 . | Dilution 50% ppc, CTM E042D |
| 17 . | Dilution 40% ppc, CTM E042D |
| 18 . | CTM E043B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POYAD SB131 | Pooya Polymer Tehran | PP, Unspecified | POYAD |
| ALTECH® PA66 C 2033/509 GF33 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| FERROCON® EPP99GA02BK | Ferro Corporation | PP Copolymer | FERROCON® |
| LNP™ STAT-KON™ RX05489 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ STAT-KON™ |
| Formolene® 2575N | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
