Order Products : sales@su-jiao.com
INVISION™ VX 5075UI
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | INVISION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CeHZl4_INVISION-VX-5075UI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPV Partially Crosslinked EPDM Rubber |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 75 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.70 | MPa | ISO 527-2/500 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 35 | kN/m | ISO 34-1 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (200°C, 243 sec^-1) | 148 | Pa·s | ASTM D3835 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN ANC100 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| AKROMID® S3 GF 15 1 natural (3223) | AKRO-PLASTIC GmbH | Nylon 610 | AKROMID® |
| Exceed™ 1012 HA mVLDPE | ExxonMobil Chemical | mPE | Exceed™ |
| Hytrel® PC948 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| Lucky Enpla LAY1003 | Lucky Enpla Co LTD | PC+ABS | Lucky Enpla |
