Order Products : sales@su-jiao.com
NORYL™ SA120 resin
| Category: | PPE , Polyphenylene Ether |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | NORYL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CdGAOn_NORYLSA120resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NORYL SA120 resin is a low molecular weight polymer based on Polyphenylene ether (PPE). NORYL SA120 is intended for use as additive or building block in a variety of thermoplastics, thermoplastic elastomers like Styrenic Block Copolymers, and thermoset materials like Epoxies, Phenolics, Polyurethanes, and Unsaturated Polyesters. Properties that may be improved by adding NORYL SA120 resin to these thermosets can include: Thermal (glass transition temperature), Adhesion (at elevated temperatures), Mechanical (toughness, dimensional stability), Chemical resistance (acids, bases), Moisture absorption, and Electrical Properties (dielectric constant, dissipation factor). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.02 | g/cm³ | ISO 1183 |
| 1% weight loss (TGA) | 290 | °C | Internal method |
| D | 2.70 | Internal method | |
| Decomposition Temperature - Onset (TGA) | 440 | °C | Internal method |
| Gardner color- 20% in Toluene | Internal method | ||
| -- 2 | 12.0 | Internal method | |
| -- 3 | 14.0 | Internal method | |
| Mn | 2350 | Internal method | |
| Mw | 6300 | Internal method | |
| Phenolic End-group Content | 425 | µmol/g | Internal method |
| Tg (half width) | 165 | °C | Internal method |
| Intrinsic Viscosity | 0.12 | dl/g | Internal method |
| Viscosity- Pure (240°C) | 73.4 | Pa·s | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Softening Point - R&B | 210 | °C | ASTM D36-95 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.54 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 7.0E-4 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | Bulk Density |
| 2 . | Initial |
| 3 . | Aged 177°C, 24 hrs, nitrogen |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC PM 80/A | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Kumho SBR 1712 | Korea Kumho Petrochemical Co., Ltd. | SBR, Emulsion | Kumho SBR |
| Plenco 04301 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
| XANTAR® C CP 200 | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® C |
| Preformance® PET 1708HS(A) | AlphaPet Inc. | PET | Preformance® PET |
