Order Products : sales@su-jiao.com
Visiloy™ 2415T2U2
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Technical Polymers, LLC |
| Trademark: | Visiloy™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CcXRmT_Visiloy-2415T2U2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Visiloy™ 2415T2U2 is an Acrylonitrile Styrene Acrylate + PC (ASA+PC) material. It is available in North America for extrusion or injection molding. Important attributes of Visiloy™ 2415T2U2 are:
Typical application of Visiloy™ 2415T2U2: Automotive |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 62.1 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 30 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2520 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 320 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 116 | °C | |
| 1.8 MPa, Unannealed | 107 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 to 104 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 260 to 282 | °C | |
| Mold Temperature | 54.4 to 71.1 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 30 to 80 | rpm | |
| Clamp Tonnage | 4.1 to 8.3 | kN/cm² | |
| Cushion | 3.18 to 6.35 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.0:1.0 to 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA 3030 XA | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| NPC PE HD6070UA | NPC Alliance Corporation | HDPE | NPC PE |
| GAPEX® HP RPP10EC13AL | Ferro Corporation | PP Homopolymer | GAPEX® HP |
| PELPRENE™ S9002 | TOYOBO America, Inc. | TPEE | PELPRENE™ |
| Resilience™ LS21150E | PolyOne Corporation | PVC, Rigid | Resilience™ |
