Order Products : sales@su-jiao.com
ESPOLEX 903
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Sumitomo Chemical America, Inc. |
| Trademark: | ESPOLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CTk4wq_ESPOLEX-903.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESPOLEX 903 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. ESPOLEX 903 application areas include engineering/industrial accessories, automotive industry, handles and sporting goods. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 17.0 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 20.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 640 | % | ISO 37 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 4 | ISO 179 | ||
| -30°C | 55 | kJ/m² | ISO 179 |
| 23°C | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature (Type A) | < -58.0 | °C | ISO 812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 243 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Pressure: HighPack/Hold Pressure: 40-70% of Inj PressScrew RPM: SlowPart Draft: 3-6° per sideTool Surface Finish: Light Texture |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500mm/min |
| 2 . | Type 1A, 500mm/min |
| 3 . | Type 1A, 500mm/min |
| 4 . | Thickness: 3.2 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYsan FL100 F20 | Polykemi AB | SAN | POLYsan |
| Weatherflex™ CS1536WX NTL70B | Colorite Polymers | PVC, Flexible | Weatherflex™ |
| Badamid® UL A70 H | Bada AG | Nylon 66 | Badamid® |
| Tribocomp® PA66 LGF30 TS0 S8 | Solvay Specialty Polymers | Nylon 66 | Tribocomp® |
| OTECH PVC OW734 - Wire Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
